FASTFEED
OVERVIEW
- Cut batch times in half
- Improve operator safety & ergonomics
- Reduce energy consumption up to 70%
- Meets 3-A sanitary standard #73-01 and USDA-AMS standards
- All contact surfaces are 316L with welds blended & polished
- PLC Automation controls
HOW IT WORKS
The Fastfeed system inducts, wets, and disperses countless ingredients, instantly eliminating fisheyes. Proteins, gums, starches, vitamins, fiber, sweeteners, stabilizers, emulsifiers, flavors, and colors are dispersed at rates up to 500 pounds per minute in a single pass.
The two-stage rotor/stator Dynashear high speed emulsifier immediately wets and disperses powders at the particulate level in a single pass.
The Fastfeed can make any size batch and typically in half the time because powders are inducted into the liquid stream while the batch tank is being filled. Operators add all powdered and liquid ingredients from the safety of floor level.
All powders are dispersed directly into the blend tank, so there are no time-consuming pre-blends or “side batches” that require processors to fill, add powder, mix, transfer, and repeat.
In addition, our Fastfeed for meat and poultry processors provides inline simultaneous powder induction (up to 160 lbs/minute) and dispersion for any size batch.
Sizing & Engineering Data
Scroll to the right if needed to view all information.TRY BEFORE YOU BUY
Our trial program offers a hands-on opportunity to test our state-of-the-art equipment, ensuring it meets your standards for quality and performance. Take advantage of this risk-free option to see firsthand how our solutions can benefit your business operations.
Fastfeed Features
STANDARD
- Powder hopper with vibrator
- Dynashear high shear inlline mixer
- Control panel for suction pump and Dynashear
- Ergonmic table
- Casters
- Powder suction pump
- Regulating valves
- Vacuum gauge
OPTIONAL
- All contact surfaces are 316L with welds blended & polished
- Control panel
- PLC Automation
- Optional side flush loop
- Optional double mechanical seal for sticky, abrasive or high solids applications
- Optional wand attachment
- 2.5 in. / 6.35 cm inlet on the FF-425 model
- 3.0 in. / 7.62 cm inlet on the FF-575 model
RELATED RESOURCES
Filter by type.
Watch the Fastfeed Powder Induction System in action!
Watch NowA closer look at how the FF-425 operates.
Watch Now